Quiz-summary
0 of 8 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Information
International Mechanical Code (IMC) Practice Test 3
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 8 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score |
|
Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- Answered
- Review
-
Question 1 of 8
1. Question
1 pointsBreathing Zone region shall be more than _______ from the walls of the space or from fixed air-conditioning equipment:
Correct
Please Refer: IMC Code – Definitions
Incorrect
Please Refer: IMC Code – Definitions
-
Question 2 of 8
2. Question
1 pointsSupply air to a swimming pool and associated deck areas shall not be recirculated unless such air is dehumidified to maintain the relative humidity of the area at _____ or less:
Correct
Please Refer: IMC Code 403.2.1.2
Incorrect
Please Refer: IMC Code 403.2.1.2
-
Question 3 of 8
3. Question
1 pointsThe termination point of exhaust outlets and ducts discharging explosive or flammable vapors, fumes or dusts to the outdoors shall be located with _______ from property lines
Correct
Please Refer: IMC Code 501.3.1
Incorrect
Please Refer: IMC Code 501.3.1
-
Question 4 of 8
4. Question
1 pointsPositive mechanical ventilation which provides a minimum of ______ complete air changes per hour shall be installed in limited spraying spaces
Correct
Please Refer: IMC Code 502.7.2
Incorrect
Please Refer: IMC Code 502.7.2
-
Question 5 of 8
5. Question
1 pointsThe use of gypsum boards to form plenums shall be limited to systems where the air temperatures do not exceed ______ :
Correct
Please Refer: IMC Code 602.2
Incorrect
Please Refer: IMC Code 602.2
-
Question 6 of 8
6. Question
1 pointsThe operating temperature of fire damper actuating device shall be approximately ______ above the normal temperature within the duct system:
Correct
Please Refer: IMC Code 607.3.3.1.1
Incorrect
Please Refer: IMC Code 607.3.3.1.1
-
Question 7 of 8
7. Question
1 pointsMechanical draft system Vents shall terminate horizontally at least _____ above any forced air inlet located within 10 feet:
Correct
Please Refer: IMC Code 804.3.4.2
Incorrect
Please Refer: IMC Code 804.3.4.2
-
Question 8 of 8
8. Question
1 pointsManual dampers shall be installed in connectors except in chimney connectors serving solid fuel-burning appliances:
Correct
Please Refer: IMC Code 803.5
Incorrect
Please Refer: IMC Code 803.5