Quiz-summary
0 of 8 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Information
Journeyman IMC Practice Test 2
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 8 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score |
|
Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- Answered
- Review
-
Question 1 of 8
1. Question
1 pointsSteam-Heating Boiler operated at pressures not exceeding ______ for steam:
Correct
Refer: IMC Code – Definitions
Incorrect
Refer: IMC Code – Definitions
-
Question 2 of 8
2. Question
1 pointsCommercial cloth dryer ducts shall have a minimum clearance of _____ to combustible materials:
Correct
Please Refer: IMC Code 504.7
Incorrect
Please Refer: IMC Code 504.7
-
Question 3 of 8
3. Question
1 pointsCommercial Kitchen Exhaust equipment serving a Type I hood shall have a clearance to combustible construction of not less than ______ :
Correct
Please Refer: IMC Code 506.5.4
Incorrect
Please Refer: IMC Code 506.5.4
-
Question 4 of 8
4. Question
1 pointsThe minimum openable area to the outdoors shall be ____ of the floor area being naturally ventilated:
Correct
Please Refer: IMC Code 402.2
Incorrect
Please Refer: IMC Code 402.2
-
Question 5 of 8
5. Question
1 pointsFire dampers are not required at penetrations of shafts where the steel exhaust subducts extend at least _______ vertically in exhaust shafts provided that there is a continuous airflow upward to the outdoors:
Correct
Please Refer: IMC Code 607.5.5 Exp 1.1
Incorrect
Please Refer: IMC Code 607.5.5 Exp 1.1
-
Question 6 of 8
6. Question
1 pointsUnderground Ducts shall have a minimum slope of _______ per foot to allow drainage to a point provided with access:
Correct
Please Refer: IMC Code 603.8.1
Incorrect
Please Refer: IMC Code 603.8.1
-
Question 7 of 8
7. Question
1 pointsMasonry chimney flues shall be provided with a cleanout opening having a minimum height of ______ :
Correct
Please Refer: IMC Code 801.13
Incorrect
Please Refer: IMC Code 801.13
-
Question 8 of 8
8. Question
1 pointsThe vent horizontal termination point for a mechanical draft system shall not be located closer than _____ to an interior corner formed by two walls perpendicular to each other.
Correct
Please Refer: IMC Code 804.3.4.4
Incorrect
Please Refer: IMC Code 804.3.4.4